Description
PoE pant for running the ADSBee 1090 / 1090U from a Power over Ethernet (PoE) connection. Includes standoffs and mounting screws for attaching the ADSBee.
To connect the ADSBee via Ethernet once the PoE pant is installed, disable the WiFi station and access point and enable Ethernet with the following commands:
AT+WIFI_STA=0
AT+WIFI_AP=0
AT+ETHERNET=1
Note that this pant requires 13×2.54mm through-hole pin headers to be soldered to the ADSBee 1090U (included with the pant).
Reviews
There are no reviews yet.